Here is an update on what we are doing with some of these pieces of chosen sea glass. When you choose you sea glass a flattish or flat back dome shape works best. 
The first step we find the correct height bezel wire and measure if around the sea glass and cut it to the approximate size but on the larger size so there is enough to file down and have the seams match. If the seam does not match the solder will not flow. The bezel should be fitting but not too tight so the glass will not fit. Then we take the silver sheet and measure out the backing. There are many ways to make a backing. Open, closed, forged, with a patina and so forth. We are making closed backs to make rings and or pendants with a decorative wire design which we will get too later.

This will be a blog about what we are creating with our line of sea glass jewelry. What new styles and designs we are doing on a daily basis. HL Sea Glass will be bringing you though the steps and progress of some of our artistic behind the scenes and also attempts and mistakes in jewelry designing. Hey we are human too, even after 11+ years of experience errors do happen. So lets begin! Any questions on the sea glass shards used or if you want to learn how to do a specific task, feel free ask. You can also follow us on Twitter, Follow us on Pintrest or Like Us on Facebook, where we will also be posting updates on Sales and new jewelry creations!
Thank you!
HL Sea and Beach Glass Jewelry LLC
Holly LHommedieu

Here is the start of one of the hardest designs in sea glass jewelry creating the beautiful bezel set piece. What makes it so hard is the cabochon which in the sea glass is irregular in shape and you can not just measure it like a pre cut stone. But when it is complete it is one of the most rewarding pieces to wear. Here are some of the beautiful pieces we will be working with:

We will keep you posted!